MotoWerkz Exhaustwritten by -- October 22nd, 2008Filed under: 2008 Kawasaki Zx6r,Staff Bikes | Comments (10) |
Hi guys! It’s GooDy yet again! Today, my good buddy from MotoWerkz hooked us up with their MotoGP style exhaust for my Ninja Zx6r. It is installed near the muffler inlet to reflect and dissipate sound energy, reducing the decibel level as rpm’s increase. Because the open area of the cone is greater than the area of the collector or exhaust pipe, back-pressure is minimized, so you reduce noise with little or no power loss. The cones are made from T-304 stainless steel and weigh less than .5 lbs. each.
The MotoGP style exhaust is the hottest style you can put on your bike at this time. It’s loud, it looks so cool, and it releases the true power of the bike. Whenever you mention GP styled exhausts, people are usually afraid that they will lose torque or back pressure on the bike.
But having it on my bike right now, compared to the Akrapovic unit I had earlier, the Ninja really picks up more power at any rmp. There is no losing of power at the low-end because you still have the cat on. Basically, see it as losing a bunch of unwanted weight from your bike.
So far, I’ve gotten so many compliments on how cool it looks at bike meets everywhere. It really makes the Ninja look like a MotoGP bike. After you remove the undertail section, the bike looks even sexier. And the sound is amazing, but it is loud. Don’t get me wrong. It’s not too loud for daily riding but every time you gun it, it screams!
The bike is quicker now than when it had the Akrapovic. And the most important things is that you lose almost 20lbs of stock exhaust. Not only do you remove the stock muffler, you remove the whole mid pipe. That’s big crash diet.
Right now, it runs fine with out tuning, but if you have a power commander, Motowerkz offers a map to make your bike even run better. We will keep updated on this. Till next time guys, Peace!
If you like this post then please consider subscribing to our full feed RSS or receive new posts by Email.
Last 5 posts by GooDy
- Sport Bike Lites Undertail - August 15th, 2009
- Daytona 675 Race Kit - March 8th, 2009
- GooDy's Rainy Day Tips - March 6th, 2009
- Flushmount Turn Signals - February 22nd, 2009
- Renthal Chainwheels Kit - February 15th, 2009










Damn! That’s sounds awesome! Can you show what it looks like? How hard was it to install?
Comment on October 22, 2008 @ 1:24 pm
installation is a piece of cake.
More pictures coming up.
go check out http://www.motowerkz.net for more info
Comment on October 22, 2008 @ 10:43 pm
That’s a cool video man!
Comment on October 23, 2008 @ 5:22 pm
Thanks man!! Credit to our graphic editor Mr. Dan!
Comment on October 23, 2008 @ 9:18 pm
bad ass!!!!!!!!!!! There exhausts are awesome!
Comment on November 24, 2008 @ 3:20 pm
Do you know the db level of the exhaust? Also, have you dynoed the bike (before and after)with the Motowerkz pipe?
Comment on November 25, 2008 @ 11:22 pm
The db level for the 07-08 is about 117
Stock is around 111
Comment on December 1, 2008 @ 12:05 pm
Any more videos or pics of this exhaust?
Comment on December 19, 2008 @ 4:02 am
what is the db level on a 2005 zx-6r and will there be any undertail kits made for this model
Comment on March 28, 2009 @ 1:06 pm
not sure, please check out http://www.motowerkz.net
Comment on April 2, 2009 @ 4:28 pm